Original Case Vintage

IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote


IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote
IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote

IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote   IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote

IN-14 Aruino Shield Nixie Tubes Clock in Acrylic Case with Columns and options. This clock is assembled and ready for use.

IN-14 tubes are one of the most beautiful and popular nixie tubes. Nixie Tubes Clock in economic Acrylic Case. PCB design, schematic, case and software made by GRA & AFCH.

Nixie Clock Shield NCS314 with Arduino Uno/MEGA, is integreted with Acrylic Case. It allows you to write your own unique programs on the Arduino platform, the latest sources are always available on.

Github at the "NixeTubesShieldNCS314" repository. IN-14 Arduino Shield Nixie Clock in Acrylic Case. Columns with Dots 2 pcs (optional , choose in selector). Power supply (12V/1A) (optional AC plug US EU UK AU).

User manual on vintage-style paper. Temperature Sensor (DS18B20) (optional , choose in selector). GPS Receiver (optional , choose in selector). IR Remote (optional , choose in selector). Easy to build beautiful clock we offer case.

Easy to customize firmware under Your own needs, thanks to an open platform Arduino. The latest version of the firmware is always available on GitHub. No need for additional drivers we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.

If you have ANY questions. 6 digits IN-14 Nixie tubes [hh:mm:ss]. Date format: DD:MM:YY. The maximum possible brightness of the tubes.

Slot Machine Anti poisoning tubes saving function. Temperature display [Celsius or Fahrenheit] (optional, choose in selector). GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector). IR remote controls (Remote control model Sony RM-X151/RM-X153, optional, choose in selector).

IR protocol SIRC or any protocol if you able to implement it. Automatic update information on the tubes.

Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.

(included songs: Mission Impossible, We Wish You). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end.

Unique detailed tube test our soft check each segment on every lamp. Distinguishable to see segement failure. Integrated adjustable High Voltage Power supply: 150 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits.

Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control. IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA works fluently.

Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots. Power consumption: 11-14 VDC, 750 mA.

Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive +).

Nixie Tubes Clock IN-14 size: 240(L) x 90(H) x 70(W) mm. See our video presentation of Nixie Clock on IN-14 tubes by GRA & AFCH.

IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case. If you have ANY questions, PLEASE ASK us.

The item "IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote" is in sale since Monday, October 30, 2017. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk.

This item can be shipped worldwide.

  1. Shape: Irregular
  2. Model: IN-14 Acrylic Shield Clock
  3. Character: IN-14 Arduino Shield
  4. Modified Item: No
  5. Country/Region of Manufacture: Ukraine
  6. Style: Vintage
  7. Custom Bundle: No
  8. Item Height: 90
  9. Item Width: 70
  10. Product Line: Shield Clock
  11. Smart Home Compatibility: no
  12. Material: Glass
  13. Theme: Art
  14. Original/Reproduction: Original
  15. Movement: Quartz (Battery Powered)
  16. Power Source: Electrical
  17. Type: Electronic Alarm Clock
  18. Features: 12 Hour Display
  19. Smart Home Protocol: no
  20. Color: Blue
  21. Year Manufactured: 2020
  22. MPN: does not apply
  23. Finish: Acryl
  24. Item Length: 240
  25. Frame Material: Acryl
  26. Room: Bathroom
  27. Character Family: Shield Nixie Clock
  28. Engraved: No
  29. Brand: GRA & AFCH
  30. Number Type: Arabic Numerals
  31. Era: 21st Century (2000-now)
  32. Display Type: Nixie Tube


IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote   IN-14 Arduino Shield Nixie Tubes Clock in Acrylic Case Temp sensor GPS Remote